Inspur i24

High-density 2U 4-node Server of New Generation for Data Center

Key Features

2U4N, High density and efficiency

The i24 deploys 4 x 2-socket nodes in a 2U space increasing the compute density by four fold, providing better server room space utilization.

The modular node design achieves rapid deployment, increases operation efficiency during node replacement and upgrading, and a 50% reduction in deployment time.

A unified power supply and cooling system is shared between each node in the chassis allowing for greater efficient utilization of power supply and fans. Each server node provides average energy savings of up to 15%.

High reliability, Easy management

A configuration of 1+1 redundancy power supply and fans ensure stable system operations and lowered risk of lessened availability due to server room or component malfunction.

The i24 supports TPM encryption chips to ensure data security as well as security control of the information system.

The i24 also supports a BMC+CMC dual-management model for an effortless unified management of the server's power supply and fans. In addition, users can check the regulatory information of each node through the remote management module.

Ultimate performance, Flexible architecture

With an all-flash mode, the 24 NVMe hard drives are fully configurable, resulting in a ten-fold speed. As a result, users can obtain higher input/output operations per second (IOPS), as well as faster access to cache and lower latency.

The i24 supports multiple Optane™ PMem storage configurations, enhanced storage capacities, and non-volatility memory and storage. Consequently, the enhanced data processing speed meets diverse application requirements.

Each node also supports more standard PCIe expansion slots, multiple network connector options and greater network structure configuration flexibility.

Technical Specifications




Four 2-socket compute nodes in a 2U space


Supports two Intel® Xeon® Scalable processors

Each processor supports up to 28 cores with a frequency of 2.2GHz

Each processor supports up to a frequency of 3.8GHz (4 cores)

2 x 2 UPI interconnected chains, maximum speed of 10.4GT/s The highest TDP of 205W


Intel C622/C624/C627


Each node supports up to 16 x DDR4 2400/2666/2933MHz memory Each CPU supports 8 DIMMs, 2 CPUs support 16 DIMMs.

Supports RDIMM/LRDIMM/Optane™ PMem (Up to 128GB per DIMM) Each node supports up to 2TB of memory (128GB per DIMM)

Storage controller

SATA controller on motherboard, supports RAID 0/1/5/10 Standard PCIe RAID controller RAID 0/1/10/1E/5/6/10/50

Network port

Each node supports one OCP/PHY card and two PCIe network cards

OCP:Supports 1/2 ports on 25Gb/s network card

PHY:Supports 2/4 ports on 1/10Gb/s network card

Standard PCIe: Supports 1/2/4 ports on 1/10/25/40Gb/s Ethernet  card                 

Supports 1/2 ports on 56/100Gb/s InfiniBand card

Supports 1/2 ports on 16Gb/s FC card

I/O expansion slot

Each node supports two PCIe 3.0 x16 slots


1 SUV port per node (expands up to 2 USB 2.0 ports, 1 VGA port, and 2 serial ports) 1 IPMI port


80mm cooling fans with N+1 redundancy

Power supply

Supports 2 x 2000W PSUs (platinum), 1+1 redundancy

System management

Supports BMC+CMC dual management module, IPMI, KVM Over IP and virtual media.

Operating system

Supports Windows Server/ Red Hat/ SUSE/ Citrix/ Oracle/ Neokylin/ ESXi/ Ubuntu etc.


Chassis 1:

Each node supports up to 3 x 3.5-inch front HDDs

Each internal node supports up to 2 x M.2 SSDs

Chassis supports up to 12 x 3.5-inch front HDDs

Chassis 2:

Each node supports up to 6 x 2.5-inch front HDDs

Each internal node supports up to 2 x M.2 SSDs

Chassis supports up to 24 x 2.5-inch front SSDs


Chassis 1:

Chassis with 3.5-inch HDDs: 446mm(W)×87.5mm(H)×845mm(D)

                                        17.56 inch(W)x3.44 inch(H)x33.27 inch(D)

Package size: 721mm(W)x 279mm(H)x1168mm(D)

                       28.39 inch(W)x10.98 inch(H)x45.98 inch(D)

Chassis 2

Chassis with 2.5-inch SDDs:446mm(W)×87.5mm(H)×805mm(D)

                                         17.56 inch(W)x3.44 inch(H)x31.69 inch(D)

Package size 721mm(W)x279mm(H)x1168mm(D)

                      28.39 inch(W)x10.98 inch(H)x45.98 inch(D)

Chassis weight

Chassis 1:

Fully loaded 3.5-inch chassis gross weight: 42.9kg/58kg (includes server + package+ rail kit + components box)

Chassis 2

Fully loaded 2.5-inch chassis gross weight :40.5kg/53kg (includes server + package+ rail kit + components box)

Operating temperature





INSPUR i24datasheet 20191027.pdf

i24 Product Technical White Paper.pdf

Inspur i24